Optical Brightener
-
Optical Brightener ST-2
ST-2 high-efficiency fluorescent whitening agent can be arbitrarily dispersed in soft water, acid and alkali resistance is pH=6-11, it can be used in the same bath with anionic surfactants or dyes, non-ionic surfactants, and hydrogen peroxide. Used in coatings, organic salts are incompatible with organics, and the coatings are easy to migrate and yellow after drying.
-
Optical Brightener FP-127
It has the advantages of high whiteness, good shade, good color fastness, heat resistance, good weather resistance, and no yellowing.It can be added to the monomer or prepolymerized material before or during polymerization, polycondensation or addition polymerization, or it can be added in the form of powder or pellets before or during the molding of plastics and synthetic fibers. It is suitable for all kinds of plastics, but it is especially suitable for the whitening and brightening of artificial leather products and the whitening of sports shoe sole EVA.
-
Optical Brightener OB
Optical brightener OB is one of the best brighteners widely used in plastics and fibers and has the same whitening effect as Tinopal OB. It can be used in thermoplastics, polyvinyl chloride, polystyrene, polyethylene, polypropylene, ABS, acetate, and it can also be used in varnishes, paints, white enamels, coatings, and inks.It also has a very good whitening effect on synthetic fibers.It has the advantages of heat resistance, weather resistance, non-yellowing, and good color tone.It can be added to the monomer or prepolymerized material before or during polymerization…
-
Optical Brightener OB-1
1.Suitable for whitening of fibers such as polyester, nylon and polypropylene.
2.Suitable for whitening and brightening of Polypropylene plastic, ABS, EVA, polystyrene and polycarbonate etc.
3.Suitable for addition in the conventional polymerization of polyester and nylon.
-
Optical Brightener PF-3
Fluorescent brightener PF-3 can be dissolved with plasticizer and then milled into a suspension with three rolls to form a mother liquor. Then stir in the PF-3 plastic fluorescent whitening agent suspension uniformly during the processing, and shape it at a certain temperature (the time depends on the temperature), generally at 120～150℃ for about 30 minutes, and 180～190℃ for about 1 minute.
-
OPTICAL BRIGHTENER KSNp
The fluorescent whitening agent KSNp not only has excellent high temperature resistance, but also has good resistance to sunlight and weather. The fluorescent whitening agent KSN is also suitable for the whitening of polyamide, polyacrylonitrile and other polymer fibers; it can also be used in film, injection molding and extrusion molding materials. The fluorescent whitening agent is added at any processing stage of synthetic polymers. KSN has a good whitening effect.
-
Optical brightener OEF
Optical brightener OB is a kind of benzoxazole compound, it is odorless, hard to dissolve in water, soluble in paraffin, fat, mineral oil, wax and common organic solvents. It can be used for whitening and brightening solvent-based coatings, paints, latex paints, hot melt adhesives and printing inks. Low dosage, high efficiency and environmental protection, with special effects on the ink.
-
Optical brightener OB Fine
Optical brightener OB Fine is a kind of benzoxazole compound, it is odorless, hard to dissolve in water, soluble in paraffin, fat, mineral oil, wax and common organic solvents. It can be used for whitening thermoplastic plastics, PVC, PS, PE, PP, ABS, Acetate fiber, paint, coating, printing ink, etc. It can be added at any stage in the process of whitening the polymers and make the finished products emit a bright bluish white glaze.
-
Optical Brightener BA
It is mainly used for the whitening of paper pulp, surface sizing, coating and other processes. It can also be used for the whitening of cotton, linen and cellulose fiber fabrics, and the brightening of light-colored fiber fabrics.
-
Fluorescent Brightener BAC-L
Acrylic fiber chlorinated bleaching processing technology Dosage: fluorescent whitening agent BAC-L 0.2-2.0% owf sodium nitrate: 1-3g/L formic acid or oxalic acid to adjust pH-3.0-4.0 sodium imidate: 1-2g/L process: 95-98 degrees x 30- 45 minutes bath ratio: 1:10-40
-
Optical Brightener BBU
Good water solubility, soluble in 3-5 times the volume of boiling water, about 300g per liter of boiling water and 150g in cold water. Not sensitive to hard water, Ca2+ and Mg2+ do not affect its whitening effect.
-
Fluorescent Brightener CL
Good storage stability. If it is below -2℃, it may freeze, but it will dissolve after heating and will not affect the use effect; Compared with similar products, it has the same light fastness and acid fastness;
