Optical Brightener PF-3

Short Description:

Fluorescent brightener PF-3 can be dissolved with plasticizer and then milled into a suspension with three rolls to form a mother liquor. Then stir in the PF-3 plastic fluorescent whitening agent suspension uniformly during the processing, and shape it at a certain temperature (the time depends on the temperature), generally at 120150℃ for about 30 minutes, and 180190℃ for about 1 minute. 


Product Detail

Product Tags

Structural formula

4

Molecular formula: C18H14N2O2

Molecular weight: 290.316

Melting point: 182-188°C

Appearance: light yellow powder

Scope of Application

Fluorescent brightener PF-3 is mainly used for whitening and brightening PVC, polystyrene, polyacrylate, polyester film, high and low pressure polyethylene, ABS, plexiglass, business cards, high-grade paper, etc.

Dosage

Application method: Mix the optical brightener PF-3 in the selected plasticizer at 0.03-0.1% of the weight of the plastic, and then continue with the plastic processing technology used. Note here that it must be mixed well.

Fluorescent brightener PF-3 can be dissolved with plasticizer and then milled into a suspension with three rolls to form a mother liquor. Then stir in the PF-3 plastic fluorescent whitening agent suspension uniformly during the processing, and shape it at a certain temperature (the time depends on the temperature), generally at 120150℃ for about 30 minutes, and 180190℃ for about 1 minute. That is to produce a good whitening and brightening effect. Or mix all kinds of raw materials first, and finally add PF brightener, mix evenly at 160 ℃ for about 5 minutes, and then roll into shape.


  • Previous:
  • Next:

  • Write your message here and send it to us