• Tris(hydroxymethyl) Methyl Aminomethane THAM

    Tris(hydroxymethyl) Methyl Aminomethane THAM

    Mainly used in pharmaceutical intermediates and biochemical reagents. Intermediate of fosfomycin, also used as vulcanization accelerator, cosmetics (cream, lotion), mineral oil, paraffin emulsifier, biological buffer, biological buffer Agent.

  • M-Phthalaldehyde


    M-phthalaldehyde is used in pharmaceutical intermediates, fluorescent brighteners, etc.

  • 1,4-Naphthalene Dicarboxylic Acid

    1,4-Naphthalene Dicarboxylic Acid

    1-methyl-4-acetylnaphthalene and potassium dichromate are oxidized for 18h at 200-300 ℃ and about 4MPa; 1,4-dimethylnaphthalene can also be obtained by liquid phase oxidation at 120 ℃ and about 3kpa with cobalt manganese bromide as catalyst.

  • 2,5-Thiophenedicarboxylic Acid

    2,5-Thiophenedicarboxylic Acid

    Adipic acid and thionyl chloride were mixed in the weight ratio of 1: (6-10) and refluxed for 20-60 h in the presence of pyridine catalyst. The solvent was evaporated and the residue was heated at 140-160 ℃ for 3-7 H. Thiophene-2,5-dicarboxylic acid was obtained by sodium hydroxide treatment, acid precipitation, filtration, decolorization and purification.

  • Phenylacetyl Chloride

    Phenylacetyl Chloride

    Store in a cool, dry and well ventilated warehouse. Keep away from fire and heat source. The package must be sealed and free from moisture. It should be stored separately from oxidant, alkali and edible chemicals, and mixed storage should be avoided. Fire fighting equipment of corresponding variety and quantity shall be provided. The storage area shall be equipped with leakage emergency treatment equipment and suitable storage materials.

  • P-cresol


    This product is the raw material for manufacturing antioxidant 2,6-di-tert-butyl-p-cresol and rubber antioxidant. At the same time, it is also an important basic raw material for the production of pharmaceutical TMP and dye coricetin sulfonic acid. 1. GB 2760-1996 is a kind of edible spice allowed to be used.

  • P-tolonitrile


    Precautions for transportation: before transportation, check whether the packaging container is complete and sealed, and ensure that the container does not leak, collapse, fall or damage during transportation. It is strictly forbidden to mix with acids, oxidants, food and food additives.

  • P-toluic Acid

    P-toluic Acid

    It is prepared by catalytic oxidation of p-xylene with air. When the atmospheric pressure method is used, xylene and cobalt naphthenate can be added into the reaction pot, and air is introduced when heating to 90 ℃. The reaction temperature is controlled at 110-115 ℃ for about 24 hours, and about 5% of p-xylene is converted to p-methylbenzoic acid.

  • 4-(Chloromethyl)Tolunitrile


    Intermediate of pyrimethamine. Used in the manufacture of p-chlorobenzyl alcohol; p-chlorobenzaldehyde; p-chlorobenzene acetonitrile, etc.

  • 4-tert-Butylphenol


    P-tert-butylphenol has antioxidant properties and can be used as a stabilizer for rubber, soap, chlorinated hydrocarbons and digested fibers. UV absorbers, anti-cracking agents such as pesticides, rubber, paints, etc. For example, it is used as a stabilizer for polycarbon resin, tert-butyl phenolic resin, epoxy resin, polyvinyl chloride, and styrene.

  • 2,4,6-Trimethylaniline


    2,4,6-Trimethylaniline is an intermediate widely used in dyes, pesticides and other industries. The raw material for the synthesis of mesitidine is mesitylene, which exists in petroleum. With the realization of large-scale industrial production in China, the output of mesitylene has continued to increase, so the development of its downstream products has received more and more attention.

  • 4,4′-Bis(chloromethyl)-1,1′-Biphenyl


    The key intermediate for the synthesis of biphenyl bisphenylacetylene fluorescent whitening agent CBS-X and CBS-127. It can also be used as a pharmaceutical or resin intermediate.

123 Next > >> Page 1 / 3