Optical Brighteners For Paints, Inks And Latex Paint

  • Optical Brightener ST-2

    Optical Brightener ST-2

    ST-2 high-efficiency fluorescent whitening agent can be arbitrarily dispersed in soft water, acid and alkali resistance is pH=6-11, it can be used in the same bath with anionic surfactants or dyes, non-ionic surfactants, and hydrogen peroxide. Used in coatings, organic salts are incompatible with organics, and the coatings are easy to migrate and yellow after drying.

  • Optical brightener OEF

    Optical brightener OEF

    Optical brightener OB is a kind of benzoxazole compound, it is odorless, hard to dissolve in water, soluble in paraffin, fat, mineral oil, wax and common organic solvents. It can be used for whitening and brightening solvent-based coatings, paints, latex paints, hot melt adhesives and printing inks. Low dosage, high efficiency and environmental protection, with special effects on the ink.

  • Optical brightener OB  Fine

    Optical brightener OB Fine

    Optical brightener OB Fine is a kind of benzoxazole compound, it is odorless, hard to dissolve in water, soluble in paraffin, fat, mineral oil, wax and common organic solvents. It can be used for whitening thermoplastic plastics, PVC, PS, PE, PP, ABS, Acetate fiber, paint, coating, printing ink, etc. It can be added at any stage in the process of whitening the polymers and make the finished products emit a bright bluish white glaze.

  • Optical Brightener ST-1

    Optical Brightener ST-1

    This product is used at room temperature to within 280℃, can degrade 80 times of soft water, acid and alkali resistance is pH = 6~11, it can be used in the same bath with anionic surfactants or dyes, non-ionic surfactants, and hydrogen peroxide. In the case of the same dosage, the whiteness is 3-5 times higher than that of VBL and DMS, and the alignment energy is almost the same as that of VBL and DMS.

  • Optical Brightener ST-3

    Optical Brightener ST-3

    This product is used at room temperature to within 280℃, can degrade 80 times of soft water, acid and alkali resistance is pH = 6~11, it can be used in the same bath with anionic surfactants or dyes, non-ionic surfactants, and hydrogen peroxide. In the case of the same dosage, the whiteness is 3-5 times higher than that of VBL and DMS, and the alignment energy is almost the same as that of VBL and DMS.